Ufafanuzi zaidi jinsi ya kujua tatizo linalosabisha kuwaka kwa power button LED na diagnostic LEDs.

Baada ya kupokea maswali mengi kutoka kwa wadau wa ICT yetu kuhusu tatizo la kuwaka power button rangi ya njano, pia kuwaka kwa kukonyeza taa zenye lebo ya namba 1,2,3,4. huenda pia zinakonyeza au kuwaka kama solod. Kuna sababu nyingi zinazosababisha kwa hii hali kutokea kwenye kompyuta yako. Mara nyingi huwa ni tatizo la Power, Kufeli kwa Components za motherboard, Bad memory, na mengine........Ili kufahamu mengi zaidi tafadhari bonyeza hii link hapo chini

Location and purpose of the power button LED and the diagnostic LEDs.

Power LED state	Description
Off	Power is off, LED is blank.
Blinking amber	Initial state of LED at power up. Indicates system has power, but the POWER_GOOD signal is not yet active. If the Hard Drive LED is off, it is probable that the power supply needs to be replaced. If the Hard Drive LED is on, it is probable that an onboard regulator or VRM has failed. Look at the diagnostic LEDs for further information.
Solid amber	Second state of the LED at power up. Indicates the POWER_GOOD signal is active and it is probable that the power supply is fine. Look at the diagnostic LEDs for further information.
Blinking white	System is in a low power state, either S1 or S3. Look at the diagnostic LEDs to determine which state the system is in.
Solid white	System is in S0 state, the normal power state of a functioning machine. The BIOS will turn the LED to this state to indicate it has started fetching operation codes.

 Bonyeza NEXT PAGE ili kujua mengi zaidi pamoja na diagnostic LEDs...1,2,2,4

 

 

 

 

  Hapo chini nimekuwekea Toturial mbalimbali za hilo tatizo:

 

 

 

 

Shiriki(Share) kwenye Google Plus

About ICT yetu

This is a short description in the author block about the author. You edit it by entering text in the "Biographical Info" field in the user admin panel.